Victron Inverter Phoenix 24/500 VE.Direct Schuko

Victron Phoenix 24/500 VE.Direct Schuko converter with VE.Direct port which can be connected to:
A computer (VE.Direct-USB interface cable required).
Apple and Android smartphones, tablets, macbooks and other devices (a Bluetooth Smart dongle communicating with VE.Direct is required)

Fully configurable:
• Reset levels and alarm triggering in case of low battery voltage
• Restart and shutdown levels in case of low battery voltage
• Dynamic cut-off: cut-off level depending on the load
• Output voltage 210 - 245 V
• Output frequency 50 Hz or 60 Hz
• ECO mode detection level and ECO mode on/off
Surveillance :
• Input and output voltage, % load and alarms

The full-bridge topology with a toroidal transformer has proven its reliability for years. The converters are protected against short circuits and overheating, whether in the event of overload or high ambient temperature. In ECO mode, the inverter will switch to pause if the load drops below a predetermined value (minimum load: 15 W). Once paused, the converter will turn on for a short period of time (adjustable; default: every 2.5 seconds). If the load exceeds a preconfigured level, the converter will remain on. A remote on/off switch can be connected to a two-pole connector or between the positive pole of the battery and the left contact of the two-pole connector